Sign In | Join Free | My burrillandco.com |
|
Ask Lasest Price | |
Brand Name : | Doctor Clean |
Model Number : | DT800S & Liquid bag |
Certification : | ISO9001:2008 |
Price : | Negotiable |
Payment Terms : | L/C, T/T, Western Union, Paypal |
Supply Ability : | 10000 Sets/Month |
Delivery Time : | 20-25 Days |
Liquid Soap Foam Dispenser With Disposable Bag , Foam Hand Sanitizer Dispenser
DoctorClean® Automatic Hand Sanitizer Dispenser System
1. wall mounted touchless automatic sensor soap dispenser.
2. made from 304 Stainless Steel material, acid-resisting and alkli-resisting, can fill in acohol gel.
3. locable setting can prevent sundries.
4. convenient view wiondow to see the soap level.
5. vertical and streamline design,smooth surface, can be easily clean.
6. huge capacity: 800~1000ml
7. both refilled and non-refilled inner bottle can choose,
8. can be used as shampoo/hand wash/body wash/acohol gel soap dispensers, widely used in hospital,hotel,inn,fitness center,school and other public occasion.
Product Details:
Model no.: | DT 800S & Liquid bag |
Material: | 304 Stainless Steel |
Capacity: | 800 ml (max 1000 ml) |
Function(optional): | Drop, Spray |
Sensor distance: | 6-12 cm |
Droplet(adjustable): | 0.6~0.8ml / 1.1~1.2ml / 1.5~1.7 ml |
Unit size: | 13.5 * 12.0 * 26.5 cm |
Unit weight: | 1.28 kg |
Power: | 4 pcs “C” batteries or AC 110 v ~ 220 v |
Features:
1. Smart intelligent electronics skill being adopted ensure sits
high performance. No contact, to effectively prevent
cross-infection of bacteria, prevent human damage & waste.
2. Because of advanced pump fit to all kinds of liquid can be
applicable, like shampoo, liquid soap, sanitizer, etc.
3. Power consumption is very low, battery life reaches more than
100,000 cycles.
4. Flashing LED indicates low battery.
5. There is a device for protect from stealing off.
6. Primary application: school, commercial center, health care,
institutions, hospitals, office, hotel, food factory & etc.
Additional information:
Capacity: 1000 ML, 800 ML
Dispenser: Disinfectant Dispenser, Gel Dispenser, Lotion Dispenser
Dispenser Type: Touch-Free Dispenser
Installation Type: Wall Mount Dispenser
Main Material: 304 Stainless Steel
Installation:
Do not install in areas or direct sunlight, make sure there are not
white surface or any other strong reflectors within 30cm below.
Mount the dispenser to the wall by using the enclosed screws and
wall plugs. Make sure the wall surface is cleaned and in good
condition to ensure proper mating of the dispenser to the wall.
Install six (6) Alkaline “C” Cell batteries, 1.5V into the battery chamber which is located on
the back of control box, replace the control box by sliding down.
Must be flush to bottom.
Operation:
Refillable bottle: To fill dispenser, remove the lid and fill with liquid or gel.
Disposable bag: To fill dispenser, fill with liquid or gel through the hole which is on the bag, then insert nozzle. Please fill the nozzle completely with liquid or gel (Press the nozzle & make air discharged) before installing the new bag in the dispenser to work, the drop or spray function could be more efficiency.
Open front of box to install liquid bag. Pull the valve hose out and down, place the liquid bag in box on top of the control box, place the hose in the channel, make sure the upper collar is beneath the upper notch and the lower collar fits into the lower notch.
Dispenses liquid or gel of viscosities ranging from 1,000-5,000 cps. To activate the dispenser, place hand under spout for approximately one second. Sensing range comes at factory setting of 4-8cm. The sensing range set by the factory is recommended for optimal performance. Window indicates when fill is required. The locked, hinged housing opens for re-filling only with the special key provided. Requires six (6) Alkaline “C” Cell batteries, 1.5V (not included). Green indicator light signals “IN USE”. Flashing red light signals “LOW BATTERY”. CE certified.
FAQ:
Q1.: Can you produce the hand sanitizer dispenser as per our
design?
A1.: Yes, both OEM & ODM service are available.
Q2.: Can the soap dispenser be printed with our logo?
A2.: yes, for sure, just send us the design & advise the pantone
number, thanks.
Q3.: Can you send me the sample to see the product quality?
A3.: Yes, of course.
Q4.: Are you a cleaning products manufacturer or trade company?
A4.: We are manufacturer, and have specialized in hand hygiene
products for more than 20 years.
Q5.: Can I place a trial order if the quantity is less than MOQ?
A5.: For the first trial order, yes, we can make an exception for
you, if there's any assistance needed on the marketing, pls do feel free to
us at any time.
![]() |